AC charging pile manufacturers: AC charging piles and charging processes

AC charging pile manufacturers: AC charging piles and charging processes

AC charging pile manufacturer: AC charging pile means slow charging, but AC charging pile does not have a charging function, and must be connected to the on-board charger to charge the electric vehicle, which only plays a role in controlling the power supply. AC charging piles give power engineering keys to electric vehicle chargers, because the output power of general on-board chargers is not very large, so it cannot fully complete fast charging, but DC charging piles can be selected to achieve fast charging.

AC charging pile manufacturers: the operation process of electric vehicle charging。

一. Startup stage

Car off: Park the vehicle in the parking lot according to the location of the charging port of the car, and maintain a distance of 1-2 meters from the charging pile.

二. Connecting links

1. Open the charging socket of the car. Observe the DC charging pile, charging stand insulation, needle insert and socket to ensure that it is clean and free of dirt.

2. Insert the charging gun into the charging port of the car (distinguishing between AC and DC).

(1) First, determine that the power light of the charging pile is emerald green and the fault warning light is off;

(2) Press the open button above the DC charging pile to take out the DC charging pile from the gun mount;

(3) Hold the door handle of the DC charging pile with one hand, pull the cable under the gun muzzle with the other hand, and drag the DC charging pile to the battery charging vehicle;

(4) Align the DC charging pile head with the charging plug port, press and hold the open button with your thumb, and insert the DC charging pile vertically into the charging plug;

(5) Loosen the opening button of the DC charging pile, and pull the DC charging pile outward to ensure that it cannot be separated, indicating that the plug-in is timely;

(6) Ensure that the connection is confirmed correctly, and carry out the actual operation according to the prompt information.

三. Startup phase

Method 1: Select a connected DC charging pile. Enter WeChat, use WeChat to "scan", and run the battery charging with the QR code on the scanner charging pile (if the quota is not enough, it will jump to the recharge interface).

Method 2: Log in to Alipay, use Alipay to "scan", scan the QR code on the QR code charging pile to run battery charging.

四. Termination link

Scenario 1: Filled with terminations

Under normal circumstances, after a normal full charge, the charging pile will automatically terminate the battery charging, and the DC charging pile can be unplugged immediately.

Scenario 2: Positive termination

If you have to terminate and leave halfway, you must enter the private information page of the WeChat official account, click "Charging", and enter the page shown in the picture. Click "Terminate Battery Charging", and after termination, you can receive the details of the battery charging order, and then unplug the DC charging pile.

五. Charging completion link

(1) After the charging is completed, the charging pile system can turn off the power before the actual operation of the gun can be carried out;

(2) Hold the door handle of the DC charging pile with one hand, press and hold the open button with your thumb, pull the bottom of the gun body with the other hand, and pull out the DC charging pile vertically;

(3) Insert the charging gun into the mount of the charging pile.

Thank you for watching, if you need to install a charging pile, remember to consult our charging pile manufacturer.